About Mark Withers

Mark Withers · 12-30-2014

Running Migration Utility on my Migration ACS Server (not my production server) to migrate from ACS 4.2 to ACS 5.5, I get "FATAL - Fatal Error !! - cannot connect to ACS 4.x DB !!" Bug report for CSCtn17779 states to run migration machine on Windows ...

Mark Withers · 04-07-2014

The "packet-tracer" command for ASA's is fantastically helpful, so I have to wonder:Is there a version of the packet-tracer command for IOS? Some feature set or something?Thanks!

Mark Withers · 01-30-2014

I've got a managed FlexConnect AIR-CAP1602I-A-K9 access point that was offline for a few hours.Checking "more event.log" I see it would fail from static IP to DHCP, then reboot. After each reboot I'd see this message several times per boot cycle:Mar ...

Mark Withers · 08-09-2013

So I'm pushing out a config template to my APs via CPI1.3 (Configure, Lightweight AP Configuration Templates; select template; select my APs, Apply). I get a "Partial Success" to a few of my APs. When I hit "Details" for these partial successes I get...

Mark Withers · 12-29-2017

Highly misleading reply. I know it's an old thread, but it's a high result on Google searches. Melanie asked about 040-05F. Reply regarded the guard band between upstream and downstream, normally around 01E-02F (but in his DSLAM 01E-044). Of note, ...

Mark Withers · 06-26-2017

For anyone still confused: We're looking at two static routes: ip route 0.0.0.0 0.0.0.0 172.10.10.10ip route 0.0.0.0 255.0.0.0 Null0 The first, "ip route 0.0.0.0 0.0.0.0 172.10.10.10" says "anything that matches 0.0.0.0 with a mask of 0.0.0.0--that m...

Mark Withers · 11-30-2016

Massively so, even several years and versions later. "Pre-deployment"? Really, Cisco? Really? That makes it sound like some prerequisite that needs to be put on every machine BEFORE I install the real thing. I know, I know, RTFM, would love to find ...

Mark Withers · 02-04-2016

Try running these 2 commands in the CLI on primary and standby: show conn count show xlate count If you have numbers here approaching 64,000, then you have an indicator of NAT/PAT exhaustion. In my experience numbers past about 44k caused issues (...

Mark Withers · 12-14-2015

We spent years on this with TAC engineers. The best solution we got to was having WCS or Prime (which took over for WCS) push out a template every morning with the VLAN mapping. Some people have reported only needing it weekly, others needing it hou...

Member Since	‎06-17-2013 11:47 AM
Date Last Visited	‎09-24-2018 02:15 PM
Posts	40
Total Helpful Votes Received	30

User Statistics

User Activity

CSCtn17779 - ACS5 migration utility aborts with errors on Windows 2008 64 bit

ASA packet-tracer command for IOS?

Power Table corruption (AIR-CAP1602I-A-K9)

Cisco Prime Infrastructure 1.3 Template Application Logs

Re: DMT Bits Per Bin ?

For anyone still confused:

Massively so, even several

Try running these 2 commands

We spent years on this with