Hello Chris,
As you have found, the SG350 and the 2960L have very simular feature/functions. The main difference is the SG350 is purpose built to be easy to manage via the web GUI. If you prefer the IOS CLI, then the 2690L is a good choice. The ...
Yes, if the switch is in stand alone, then stacking is disabled. With stacking disabled, the combo ports are now like any other port. Thus, you can use them as standard access or trunk ports. Furthermore, these port could be added to a LAG.
Thanks for contacting Cisco,
The uplink ports between the SG300 and SG500 must be trunk with Vlan 1 untagged and Vpan 10 Tagged. Also, on both switches, set the auth voice vlan to 10.
Best REgards,
Thanks for contacting Cisco
QuickVPN is not support on Win 8.
You could use the PPTP server on the RV110 and then add the pptp client connectionon your Win 8 box.
- PPTP client is built into the OS of PCs and MACs
Best Regards,
Thanks for contacting Cisco,
The RV110w does support 1 site to site VPN tunnel. The key is to make sure the configuration matches on both ends. Of course the IP addresses will be different and the local and remote LAN IPs.
Also, the WAN IP must b...