About paul_au1234

paul_au1234 · 09-08-2014

Hi,Tried to download Cisco IOS xRV (iosxrv-demo-5.1.1.ova) from website and applied in my ESXi 5.5.0 server. After power on the VM, the console showed "Booting 'IOS XRv" without any further action and no response from console (telnet connection). Any...

paul_au1234 · 11-16-2012

Hi all,I tried to configure HSPA+7 module in Cisco 2901. After configure profile and setting, it prompted the following console message and no further debug message for chat nor modem.Can anyone advise it?Thansk!Paul Au===============================...

paul_au1234 · 09-10-2014

Hi Wouter, Thanks for your reply. I used telnet instead of SSH but still cannot work. Serial console's IP address should be same as VM Vsphere management IP address. Right?Attached is some screen capture for your reference. Thanks!Paul Au

paul_au1234 · 09-09-2014

HiThanks for your reply. I had already added serial port with telnet port but failed to connect from remote SSH client (showed network connection). Is it normal to support "Booting IOS XRv" without further message ? Any log to troubleshoot the cause?...

paul_au1234 · 11-16-2012

Hi Thanveer ,Thanks very much for your reply.From below explanation, it seems it was cause by configuration error. As I am new to Cisco router, do u think something wrong in the configuration?Thanks!Paul Au #Explanation The lower level software wa...

paul_au1234 · 11-16-2012

Hi ,I am using EHWIC HSPA+R7 module for Cisco 2901 but encountered the following error after configuration.Can u advise and help?ThanksPaul AuNov 17 04:54:36.243: %LINK-3-BADENCAP: Interface Cellular0/0/0, Bad encapsulation code (30) -Process= "Exec"...

Member Since	‎11-16-2012 08:42 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	5

User Statistics

User Activity

Fail to bootup IOS xRV in ESXi 5.5.0

EHWIC-3G-HSPA+7 in Cisco 2901

Hi Wouter, Thanks for your

HiThanks for your reply. I

EHWIC-3G-HSPA+7 in Cisco 2901

Re: Slight configuration changes for 3G connectivity on new C887VAG+7