I have, it still does not show up are even when I turn the AP into Monitor Mode. ... View more

I think I've identified the problem switches to which they are connected hosts are on a switch found Inventory> Device Administration> Add / Import / Manage Devices. But it is his default gw,  is interface vlan of a nexus 7000, I read that lms for discoverer the host must have its default gw in Inventory> Device Administration> Add / Import / Manage Devices .LMS supports only Cisco default gateways . Solutions? Thanks Emiliano ... View more

But this is the only solution of deauth attack , isn't it ? ... View more

I have read all the documentation found, but to this day I do not understand how that part of wips (ips) is configured as it behaves just like ids. Have you any idea how to configure it to use it as prevention as happen ips for forms of 'ASA. Thanks a lot E. ... View more

Thanks Marvin Sent from Cisco Technical Support iPhone App ... View more

Hello Vinod, Timeout which you pointed is not applicable for Image upgrade. I'm copying the entire information below, ===================================================================================== LMS TImeout recommendation based on case history Introduction We have seen numerous cases related with timeout problem where customers are impacted in Inventory, Config and Image Management areas. Problem In LMS4.2 onwards, there was a feature introduced under  "Admin > Collection Settings > Inventory > Edit the Inventory/Config Timeout and Retry Settings" to increase various timeouts based on Device Type Groups. Due to this, all devices wont be impacted and only problematic devices consumes more timeout. Solution Below are the timeout recommendation which would solve inventory collection, config collection and image upgrade problems. We have solved timeout problems by applying below timeout values in critical customer servers like Seaworld, Travelers, Madison Square Garden, LAWA, FairView, Cargil, AISD and so on. Timeout Recommendation ===================== a)  Device Type:  Nexus, MDS, CatOS (CONFIG FETCH PROBLEM)    Solution:       Timeout needs to be increased for entire group from Admin > Collection Settings > Inventory > Edit the Inventory/Config       Timeout and Retry Settings           TuneSleep – 5000           DelayAfterConnect – 3000           ReadDelay - 200 b)  Device Type: Cisco Catalyst 2960 Series Switches, 2960 stack, 3560 stack, 3560-E, 3560-X, 3750 stack, 3750-X, 3750-G (IMAGE UPGRADE PROBLEM) Sample log from device_telnet.log =========================== Test#archive download-sw                                                             Test#archive download-sw /overwrite tftp://*.*.*.*/rep_sw_4720235330803895212 Loading rep_sw_4720235330803895212 from *.*.*.* (via GigabitEthernet1/0/1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [OK - 13291520 bytes] Loading rep_sw_4720235330803895212 from *.*.*.* (via GigabitEthernet1/0/2): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! examining image... extracting info (110 bytes) extracting c3750-ipservicesk9-mz.122-53.SE2/info (698 bytes) extracting info (110 bytes) Stacking Version Number: 1.43 System Type:             0x00000000   Ios Image File Size:   0x00C1EA00   Total Image File Size: 0x00CAAA00   Minimum Dram required: 0x08000000   Image Suffix:          ipservicesk9-122-53.SE2   Image Directory:       c3750-ipservicesk9-mz.122-53.SE2   Image Name:            c3750-ipservicesk9-mz.122-53.SE2.bin   Image Feature:         IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128 Old image for switch 1: unknown Extracting images from archive into flash on switch 1... c3750-ipservicesk9-mz.122-53.SE2/ (directory) extracting c3750-ipservicesk9-mz.122-53.SE2/c3750-ipservicesk9-mz.122-53.SE2.bin (12700373 bytes) In above log, extraction was not fully completed though .bin was copied. LMS would look for below line and then only it declares job is successfully completed. Until then, image distribution job would be failing. Installing (renaming): `flash:update/c3750s-ipservicesk9-mz.122-53.SE2' ->                                        `flash:/c3750s-ipservicesk9-mz.122-53.SE2' New software image installed in flash:/c3750s-ipservicesk9-mz.122-53.SE2E All software images installed. Solution:       Timeout needs to be increased for a device or entire device type group from Admin > Collection Settings > Inventory > Edit the Inventory/Config Timeout and Retry Settings           ReadDelay – 200ms           Telnet Timeout – 800s(This timeout is applicable for both TELNET and SSH) WARNING: Please be aware that increasing above timeouts to 300 and 800 solves the image upgrade problem but this would be applicable for config collection as well. If you are applying this timeout for all devices or specific device type group then take a case of slower device or unreachable device, LMS waits 800secs to declare that device is unreachable , hence you may see slowness in completing config colleciton job. So please increase the timeouts based on per device level and then revert back to default settings. Since image upgrade process is one time activity. You can also gradually increase ReadDelay and Telnet timeout to a larger value if still extraction was not fully completed. This depends on network bandwidth and device response. Best Practices/Recommedation: For better upgrade results, please use Remote Staging option and then Select External TFTP server option in case of larger network where you can trigger 5 jobs in parallel having 30-50 devices in each job. c)      DeviceType: Cisco Catalyst 4500 and 6500 switches (INVENTORY COLLECTION PROBLEM)                     Solution:               ---> Timeout Interval(in seconds) – 15 (i.e SNMP Timeout)           NOTE: If inventory collection fails still, gradually increase the timeout to 20, 30 and run again.       d)      Device Type: ASR9k (Inventory collection fails due to timeout issue)                                Solution:            ----> Timeout Interval(in seconds) – 20 (i.e SNMP Timeout).                   NOTE: If inventory collection fails still, gradually increase the timeout to 25, 30 and run again. =============================================================================================== Message was edited by: Srinivasan Rajagopal ... View more

The report I was thinking of is actually the TrustSec Readiness Assessment which shows you which devices are capable of having 802.1X features enabled. ... View more

Thank you for your prompt response when I get back to work and will check shall compare the configuration, I wanted to ask is, however, enabled Admin> Collection Settings> Config> Config Collection Settings " "Periodic Polling" "Periodic Collection" "VLAN Config Collection thank you very much Emiliano ... View more