Hi Both our IBM support engineer and our HDS support engineer have suggested that the IBM Z10 has to convert from ficon to FC and therefore may require a "Mainframe Pkg" license on the Cisco 9509 switch. Would you have information to support this...
Hi Ken,Thank you very much for the reply. The mainframe IOCP is generated as 'FCP' connection to the ports below.The switch config is given below:They are both zoned correctly and in the active zoneset. zone name Z10-SANA vsan 101 fcid 0xa20129 ...
Thank you, Ken.I did contact IBM and they don't have a clue either. I contacted Hitachi and their response is switch configuration (CISCO 9509) is ok. So, they plan to take a dump of their storagedevices - which doesn't make sense. But, your respo...
