Hello Experts, would like to understand if the following can be achieved for ECE 11.6 1. Delete the mail from the mail server after the mail is downloaded to the ECE via POP3.2. Using Custom Port for POP3, instead of 110, used port 10110? Regards
Hello Experts, How does CUAC determine whether the Phone Number is internal or External? I have been seeing only Internal all these while on the Client Console, even if the call is from external. Does the external Access Number under General Properti...
Hello Experts, I am facing some issue with Multicast MOH from Remote Gateway (might not possibility be a SRST), and it is claim that we could only use G711 between the Phones/Gateway Region to the MOH Server's Region.Is it true?I understand that this...
HiI had 2 call managers in a cluster, 2 voice gateways at a remote branch.I would like to have a multicast Moh streaming from the voice gateway, with redundancy (if one cucm or one gw fails) the Mmoh can still be stream to phoneIs this possible?Sent ...
Hello Experts,I am not sure if I am making this complicated but hope to hear from you.In my setup, my CUAC is Centralize in Location "A".CTI Template's User Hold and Network Hold is Configured as Stream 10. (Music which the Caller would hear when the...
From the Branch Voice VLAN, are you able to ping to the Main Site Wireless Voice VLAN? and Vice VersaHave they been specific as the interesting traffic under the Site to Site VPN Tunnel?
Hello Experts, Look like the Real Environment had played me out. When I had 2 x Region Setup (REG-SITEB, REG-MOH)DP-SITEB configured with REG-SITEB, DP-MOH with REG-MOH MOH Server Device Pool is DP-MOHPhones and Gateway Device Pool is DP-SITEB the Ba...
Thanks Guys for the reply.Got it figured out with the Cisco hardphone. Seem like the CIPC is giving me a different set of Results.CIPC is working with G729 Codec Multicast MOH Streaming. hence that is why I am confused over this concept.