About ajc

ajc · 11-21-2023

Configuration backup from ISE 2.7 p10 always worked fine via GUI for FTP. Now I am running 3.2 p4 and having issues with such simple process using FTP. If I do from CLI : show repository bckREPO, I get all the content of the FTP server directory with...

ajc · 11-03-2023

hi everyone, I successfully deployed a VMware VM running 3.2 with RHEL 8 / ESXi 7.x and was able to install with no issues patch 2 and 3 on this version. However, I cannot install patch 4 no matter what. I verified the CHECKSUM of the file downloaded...

ajc · 07-11-2023

I have a 5516-X standalone node with a S2S VPN Tunnel to Azure working fine. I would like to know if I can add a second ASA, create an HA pair AND the S2S tunnel would still work. Looks like it is doable and my understanding is that I do not need a p...

ajc · 05-18-2023

Hi everyone,I could not find a clear explanation about the different between Administrative Speed/Duplex and Operational Speed/Duplex9500-Switch#show interfaces transceiver propertiesName : Te1/0/2Administrative Speed: 1000Administrative Duplex: full...

ajc · 04-11-2023

Hi everyone,When we deployed F5 and ISE PSN's, we used the documentation provided by Cisco where the values were:Source address – 180shttps_sticky – 3600sradius_sticky – 3600sMeraki Wireless default settings are configured as 10 minutes for interim a...

ajc · 03-19-2024

closing

ajc · 01-19-2024

correct, I did not restore my 2.7 backup into a fresh installed ISE 3.2. I moved from 2.7 p10 into ISE 3.2 (cli upgrade) but first I ran the URT for ISE 3.2 in that ISE 2.7 p10 VM. Once that URT verification was completed and successful, I upgraded t...

ajc · 01-19-2024

Add me to the list, I am trying to deploy an ISE 2.7 OVA file using VMWare ESXi 6.7 (I do not have vCenter) and it is giving me an error but different to the one related to "missing attributes ID". I will open a TAC Case and see if I must follow the ...

ajc · 01-17-2024

UPDATE: (I edited my previous post because I missed one final step)I just confirmed in the lab, an ISE VM created in the UCS ESXi 6.7 Server can be upgraded with no issues. I only installed patch 10 on that VM running ISE 2.7 before the upgrade. See ...

ajc · 01-15-2024

Hi everyone, where do you get the Authorization and Accounting total numbers for the TPS calculation formula? I can easily find out the Authentication ones from Operations -- > Reports --- > Endpoints and Users --- > Authentication Summary

Member Since	‎03-25-2013 08:55 AM
Date Last Visited	‎03-20-2024 12:30 AM
Posts	1,031
Total Helpful Votes Received	597

User Statistics

User Activity

ISE 3.2 patch 4 Configuration Backup via GUI failed

ISE 3.2 patch 4 installation failing

Can we build a Site to Site VPN tunnel with an ASA HA pair?

9500 cat interface stat "administrative" versus "operational"

F5 persistence configuration & Interim Accounting Updates hitting ISE

Re: PPPOE connect on Cisco ASA

Re: ISE 2.7 to 3.2 Migration Questions

Re: ISE 2.2 and 2.3 and vCenter 6.5 - .ova still not working!!!

Re: ESXi requirement to run ISE version 3.2?

Re: Transactions per Second Measurement for ACS to ISE Migration