About steven.vandyk

steven.vandyk · 08-11-2017

Hi thereI have a customer with an ISE 2.0 cluster (2 nodes) running RADIUS services for wired and wireless.Now they want wireless onboarding, and because of some certificate issues with 2.0, we have deployed a seperate 2.2 node for onboarding.The onb...

steven.vandyk · 09-23-2013

We are doing a POC with 3850 as MA+MC.When the AP is in the wireless management VLAN, there is no issue, the AP joins the controller.However we want another VLAN to be used for the APs.Following errors on the console:*Sep 23 11:55:00.423: *spamApTask...

steven.vandyk · 08-07-2013

HelloI have installed 1.2 and when guests login, they get the new (not improved imo) device registration portal, but the field where they have to enter the MAC adress is empty, I can remember it was prefilled in previous ISE versions. Is this normal ...

steven.vandyk · 09-17-2012

Hello I am trying to configure repeater mode on an AP, but the authentication is not working.It seems the authentication is seen as EAP-TLS on the ACS 5.2, but im trying to do LEAP.Relevant config root AP:!dot11 ssid Auto3 authentication open eap e...

steven.vandyk · 09-04-2012

Hello thereI have an ISE 1.1.1 setup, with a guest portal. The AD can be used to log onto this portal, and the Guest Portal Policy Configuration is on First Login.However, every time a AD user logs in on the portal, he has to accept the User Accept P...

steven.vandyk · 04-05-2019

When using the show nmsp status command im not seeing the cipher option, however I am also on 8.5.140MSE IP Address Tx Echo Resp Rx Echo Req Tx Data Rx Data-------------- ------------ ----------- ------- -------XXXXXX 242114 242114 9...

steven.vandyk · 10-23-2014

Had the same issue, certificate had a typo, after adding correct certificate, problem was solved.

steven.vandyk · 08-07-2013

CWA + provisioing flow did not make any difference, still no MAC adress

steven.vandyk · 10-01-2012

The problem seems only to occur when WDS is active. Something about LEAP and WDS that is not working on my configuration.UPDATE: Found the problem. The WDS Server Groups Client Authentication Profile needs to allow EAP authentication also, not only L...

steven.vandyk · 09-18-2012

Why do you say special config on top of 1.1.0.7? It is 1.1.0.7 without any extras I was trying to do Im gonna test your solution and find the difference.

Member Since	‎12-08-2006 04:43 AM
Date Last Visited	‎05-25-2022 12:02 AM
Posts	26

User Statistics

User Activity

Onboarding on a seperate cluster

Problem with AP join on 3850

Ise 1.2 Device Registration not auto filling the MAC field

Weird problem setting up APs in Root <> Repeater

ISE 1.1.1 - User Accept Policy keeps returning

Re: WLC NMSP status is inactive

Had the same issue,

Ise 1.2 Device Registration not auto filling the MAC field

Re: Weird problem setting up APs in Root <> Repeater

Re: Weird problem setting up APs in Root <> Repeater