About 3iron

3iron · 02-20-2019

Hi, I have been reading through the following tacacs configuration guide; https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/sec_tacacsplus.html#71793 Example configuration is prov...

3iron · 10-06-2015

Hello, Has anyone had any luck setting up Prime to use Radius authentication for administration users against ACS5.6? At the moment the ACS is returning successful authentication '11002 Returned RADIUS Access-Accept' on an attempted Prime login altho...

3iron · 07-06-2015

Hi All,Is it possible for ACS 5.6 to create multiple syslog outputs? I attempted to set up the following on ACS 5.6 but it would not allow two remote log targets with the same IP address. System Administration > Configuration > Log Configuration > Re...

3iron · 06-18-2015

Hi All,I would really appreciate thoughts and opinions on this strange issue experienced recently.Consistent behaviour noted from problem clients:Up to a certain time in the morning user PC's were requesting the use of 169.254.x APIPA addressesNot ac...

3iron · 05-28-2015

Hi All,Could I ask a kind soul to help clarify the use of loopback. I've been reading the link below and it provides and example of how loopback could be used.http://www.cisco.com/c/en/us/td/docs/routers/access/1900/software/configuration/guide/Softw...

3iron · 02-21-2019

Many thanks ngkin2010 and RJI for taking the time to reply to this - much appreciated.

3iron · 02-20-2019

Hi ngkin2010 OK thanks for the confirmation. Mixed up IOS and NXOS. I understand NXOS uses AES to encrypt the key? Cheers Ben

3iron · 04-28-2017

This exact same issue happened to me using firefox with access policies. I could not find a way of restoring just this area, its more the entire environment. I had to rely on a previous screenshot of the rules to manually add them back in. Unfortun...

3iron · 02-20-2017

Hi Phi, I am currently planning an upgrade from 5.6.0.22.7 to 5.8.1.4. This has involved testing the application bundle upgrade process a few times. Licensing was one query I had too. In my experience - the application upgrade bundle process retains...

3iron · 07-21-2016

Ok after some searching I found cisco doc with a scenario reference: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-6/user/guide/acsuserguide/admin_operations.html#75607 Scenario covered in failover section "ACS 5....

Member Since	‎01-17-2012 12:22 AM
Date Last Visited	‎03-14-2019 08:51 AM
Posts	21
Total Helpful Votes Received	5

User Statistics

User Activity

TACACS configuration clarification

Prime 2.2 and ACS5.6 - Radius authentication - Login issues

ACS 5.6 multiple syslog output possible?

Certain PC's on vlan using link local 169.254.x even though communication present to DHCP Server?

Going loopy over loopback!

Re: TACACS configuration clarification

Re: TACACS configuration clarification

This exact same issue

Hi Phi,

Ok after some searching I