Hi fellows.
Everytime I try to login in License Manager I find a blank web page.I have tried by rebooting the server, I have regenerated IPSec cert and restarting the DRF local and master services, I even did reset the license manager user password...
Hi everyone.I have a problem where inbound calls reach a SIP trunk in a voice gateway 2811 and then forwarded to CUCM via dial-peer. Everything is OK when is answered in an IP phone but when trying to transfer to anorther extension there are problems...
Hi everyone.
Every time a place an outside call i received the messages
Disconnect Cause (CC) : 57Disconnect Cause (SIP) : 403
the flow of the call is:
____________________________________________
3001 92144440
IP...
Hi guys.I have this issue when some of the calls placed in a E1 have echo.What I have be done so far is to change the command "echo-cancel coverage 24" to the values 128, 96, 24, under the E1 voice port config.But still nothing.Any ideas are welcome
Hi Bridget
What I think you need to do is first a Pilot number that involve the 3 directory numbers you want.Then in directory number window of each DN, in the busy trigger field, change the value to 1.I hope this helps
Fernando
Hi Vivek.
You are right and in this case is a peer to peer service, they gave me a private static IP address. I have configured a softphone with the info provided and all worked fine either incoming and outgoing calls, I'm going to take some wireshar...