i need help, i created a sip trunk with other sip server, but the cme give this error: 070846: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:INVITE sip:900@200.111.156.150 SIP/2.0Via: SIP/2.0/UDP 54.207.30.33:5080;rport;branch=z9hG4bKD7U28atZZ6r...
I have a problem with the phone 502 and the module expansion SPA500S, these are registered to a SIP server in the UDP port 5080 , everything works fine, unless pickup from the module expansion. when i check the SIP packets, to perform the pickup se...
Dear, I have the problem when making a call to the PSTN, I get a busy tone, this is the log: Jan 13 12:53:02 1.1.6.240 5704072: 553122: Jan 13 14:53:07.487: ISDN Se0/3/0:15 Q931: TX -> SETUP pd = 8 callref = 0x182C Jan 13 12:53:02 1.1.6.240 5704073...
I updated a UC520 to the latest firmware version, but does not work properly,because the lights are off in the normal state and not green as it should, when theextension is occupied is shown in red, but then fly off, please help in this case.
i can problem with list.xml, it load the imagen in the phone 7975, attach configuration and log problem, please your help.tftp-server flash:/Desktops/320x212x12/List.xmltftp-server flash:/Desktops/320x212x16/List.xmltftp-server flash:/Desktops/320x2...
not think it's estimated that, on another call that occupies the same channel and the call occurs. to me it gives the impression that the PSTN problem. Could it be congestion in the PSTN?Jan 19 08:58:53 1.1.6.240 5734527: 568168: Jan 19 10:59:00.05...
estimated, the problems are some times, but not overloading the UC500, which can happen when there is only one or two calls.UC520#sh controllers e1E1 0/3/0 is up. Applique type is Channelized E1 - balanced No alarms detected. alarm-trigger is not ...
is fractional E1, the configuration is:controller E1 0/3/0 framing NO-CRC4 pri-group timeslots 1-16process-max-time 50 Can it be problem of UC500? or the PSTN?
Dear I tried with the firmware in 7 but nothing happens. with respect to the tftp debug shows:.Sep 9 14:20:08.839: TFTP: Server request for port 1024, socket_id 0x6913356C for process 184 .Sep 9 14:20:08.839: TFTP: read request from host 192.168.10...
