Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Slava Zhilov
Stats
Member since
01-22-2014
19
Posts
0
Helpful
0
Solutions
05-18-2015
09:29 AM
Hello! I have a web server that needs to serve 4 different local subnets and be in DMZ, behind firewall to Internet. For example, the 4 subnets are: 192.168.0.x (the server already connected to this one), 192.168.1.x, 192.168.2.x and 192.168.3.x. I have RW180 router that I would like to use for that. I can figure out firewall settings for the interhnet. I will plug Internet cable into WAN port and adjust firewall, I have found it in the web interface of the router. Then, vy idea is to connect all those 4 local subnets to LAN ports in the router, create 4 VLANs and virtually connect all those 4 by creating port forwarding, or static routes, or something. I can't quite figure out what and how. I see VLANs menu in the WEB interface of the router but I can only view the table of routes and can not change it. First, can the task above be implemeted with the router I have or I need a different equipment? If it can, could you point out the settings please.
... View more
Labels:
10-22-2014
02:45 AM
Good afternoon, I have CISCO Router RV180. Besides the gateway I'm also using it as a firewall. I have a computer in LAN that connects through the router to internet and also to a remote VPN Server (L2TP IPSec). If I set firewall at the RV180 router to "Always Block" having no allowing rules to go out I of course can't connect to Internet from LAN but I still can connect to the remote VPN server located in internet. How could that be? Could that be that such settings block TCP ports but don't block UDP ports (in order to connect to the VPN I need UDP 500 and UDP 4500 to be allowed for outgoing traffic)?
... View more
- Tags:
- rv180 firewall
Labels:
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-26-2014
07:02 AM
02-26-2014
07:02 AM
It is working now, thank you.
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-22-2014
03:57 AM
02-22-2014
03:57 AM
Thank you very much. In this case wouldn't be better a following scheme: usual users keeps getting connected through https with no VPN set up and administrator uses VPN for remote access inside of the network for any settings etc.?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-22-2014
03:53 AM
02-22-2014
03:53 AM
Thank you. Is there any way for IOS and Andoid mobile devices to connect to such a VPN?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-21-2014
10:22 AM
02-21-2014
10:22 AM
Thank you, I just did. Still a little question - how do I determine what encryption is used and whether it is used at all?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-21-2014
10:10 AM
02-21-2014
10:10 AM
I did everything once again and it is working now. Thank you very much for all your help! So I now just to summaraze this - I have now a tunnel created and since it is encrypted I don't necessarily need to use https inside of it. The VPN policy says Encryption AES-128 If I want a stronger encryption I just need to change this setting to 256, 512 etc. at the both ends on VPN policy and it will replace https even better so I can just use plain http. My I correct on all that?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-20-2014
06:16 AM
02-20-2014
06:16 AM
Chrome made it! Thank you very much. I'm now back to Split DNS function. I have set up Split DNS at the Remote Office router at the VPN policy. I have set: Domain Name Server 1: 10.10.10.2 (Main Office Linux Server) Domain Name 1: server.local When I try to ping server.local I don't get the name resolved. If I try nslookup server.osa it says that RV180 with address 20.10.10.1 (remote office LAN) DNS Request timed out. If I try nslookup server.local 10.10.10.2 (i.e. show explicitrly what DNS server to use) I resoves it correctly. So it seems like the DNS server from the main office responds but the router from the remote office do not route DNS requests to that. Is there something I did wrong in this whole sequence?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-19-2014
11:29 AM
02-19-2014
11:29 AM
Its LAN address. I have the same toward the other end too. Could that be a firewall settings? Is there any log I can check to debug this?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-19-2014
02:18 AM
02-19-2014
02:18 AM
Thank you very much for your patience. I have now got the connection established! However when I try to go to https://remote_office_router from the main office I get an error on certificate: "You have recieved an invalid cerificate... (Error code: sec_error_reused_issuer_and_serial)". That;s using Firefox. The router in remote office is in DMZ and all incoming traffic bridged to it. I did port-forward at the the main office router site but in this case this is outgoing connection for the main office so no ports should be matter, all outgoing connections are allowed. Ping from main office to the remote office local address is going fine and also telent to that address on 443 says "Connected..." Is there anything I can do to get there by the web browser?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-18-2014
08:24 AM
02-18-2014
08:24 AM
Hello, Eric! I just realized... what if I'm behind NAT? Do I still put external IP addess to Local WAN IP or I put actual local WAN IP which is not external? I made DMZ for one of the routers but for the other one I can't do that, I can only foward ports, what ports do I need to forward? Same like I did for VPN users? Or Site-to-site using different ports?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-15-2014
02:57 AM
02-15-2014
02:57 AM
Hello! I have configured VPN tunnel between the main and the remote office using two RV180 Routers. I also created some additional users so staff who are not in any of the above offices can use VPN connection from their Windows or Linux Notebooks and connect to the corporate network. All that is set. I'm only missing now an option to connect mobile devices such as IPhones or IPads so they can connect and view the internal corporate web server too. Those don't connect by using their default OS software so I have got an idea to forward port 443 through the router to the internal web server but filter it somehow by MAC addresses, i.e. if a person with a certain MAC address connects to WAN it gets forwarded, all other devices with MAC addresses which are not listed gets denied. Is that possible with our RV180 router?
... View more
Labels:
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-15-2014
02:36 AM
02-15-2014
02:36 AM
Thank you very much, Eric. The document is good and it actually embraces all the needed steps. Just one more question. Can the DNS service located at the main office local network be used by the remote office so staff from remote office don't have to type ip address in their web browser but use the FQDN of that server or local server name instead?
... View more
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
02-06-2014
03:04 AM
02-06-2014
03:04 AM
Good day! May I ask about basic steps of creating a VPN tunnel between two CISCO RV180 routers. I'm trying to connect two remote local networks located in two different cities. Network A has a webserver which could be accessed only locally. I would like Network B users access to that server. Can the RV180 router located at Network B be a VPN clinet for RV180 located at Network A? Or they both should be gateways? If Network B has no external IP adress is that a problem? Do I need to create users for that connection or only IKE and VPN policy?
... View more
Labels:
Created by
Slava Zhilov
in Small Business Routers
in Small Business Routers
01-29-2014
02:42 AM
01-29-2014
02:42 AM
Ok, get it. So then I create IKE policy for IPSec, create users and go. Another option is to leave as it is now i.e. forwarding 443 port to LAN only. I have to choose myself I guess. Did you want to suggest something on that: If you need the router to only allow access on port 443, Port Forwarding is a better option than PPTP. Do you have only a few users that need to access the server and you are trying to block the rest of the internet?
... View more
05-18-2015
Hello! I have a web server that needs to serve 4 different local subnets
and be in DMZ, behind firew...
10-22-2014
Good afternoon,I have CISCO Router RV180. Besides the gateway I'm also
using it as a firewall. I hav...
02-22-2014
Thank you very much. In this case wouldn't be better a following scheme:
usual users keeps getting c...
Created by
Slava Zhilov
in Small Business Routers
02-21-2014
02-21-2014
Thank you, I just did.Still a little question - how do I determine what
encryption is used and wheth...
Created by
Slava Zhilov
in Small Business Routers
02-21-2014
02-21-2014
I did everything once again and it is working now. Thank you very much
for all your help!So I now ju...
02-20-2014
Chrome made it! Thank you very much.I'm now back to Split DNS function.
I have set up Split DNS at t...
02-19-2014
Its LAN address. I have the same toward the other end too. Could that be
a firewall settings? Is the...
02-19-2014
Thank you very much for your patience. I have now got the connection
established!However when I try ...
02-18-2014
Hello, Eric!I just realized... what if I'm behind NAT? Do I still put
external IP addess to Local WA...
02-15-2014
Hello!I have configured VPN tunnel between the main and the remote
office using two RV180 Routers. I...
02-15-2014
Thank you very much, Eric. The document is good and it actually embraces
all the needed steps. Just ...
02-06-2014
Good day!May I ask about basic steps of creating a VPN tunnel between
two CISCO RV180 routers. I'm t...
Public Statistics
| Date Registered | 01-22-2014 05:10 AM |
| Date Last Visited | 08-18-2017 04:01 AM |
| Total Messages Posted | 19 |
