About steve martin

L2PT VPN ASA 5525 microsoft client · 08-24-2018

Our VPN seems to be operating in only one direction. Currently we are able to ping clients but are unable to remote desktop to them and make lync calls to colleagues within the organisation from the vpn client. VPN users are able to have full networ...

steve martin · 06-29-2018

Hello, Our old mpls is being cut off tonight, but when I completed a test our secondary datacentre doesn’t advertised the connected route at that site, can you give me some advice. The bgp config is below. Have you any ideas why the connected rout...

steve martin · 10-19-2017

Hello, My company has recently purchased a mpls solution that configures the WAN and then redistributes back into the LAN at an ASR. On our core are 3 existing vrfs, that the mpls will need to integrate with. The main vrf has BGP running within i...

steve martin · 06-24-2017

I've have an vpn tunnel that works one way, I suspect the problem is overlapping subnets. I've tried added the subnets individually to the acl to avoid this situation but when I do I get the following error and the vpn fails on phase 2. My questio...

steve martin · 05-25-2017

The Attendant advanced console software v11 on our reception pc is not working, though it looks ok, calls to extensions are just being cut off. The queue is ok, but any attempts to forward result in the operator hearing one ring then it cuts the cal...

steve martin · 06-29-2018

Thanks Pawan for making it clear, you have given me confidence that it will go well

steve martin · 06-29-2018

Hello Pawan, We are using vrfs and there are a lot of old routes that aren't needed. Let me know if you need more information. Outputs are on the file. Thanks

steve martin · 10-20-2017

Thanks for the information, can you just clarify that the routes will appear without any additional configuration. Will I need to setup an instance of BGP/ or another dynamic routing protocol on the vrfs that currently don't have any routing setup t...

steve martin · 10-19-2017

Yes that's right, though I haven't got access to the configuration on the router.

steve martin · 06-24-2017

Thanks for the response Rahul, I think your right about the wildcards, here's the asa side. Can it work with multiple subnets then. The asa is config is the one the correctly works one way. Cheers crypto ipsec ikev1 transform-set VPN-TRANS1 esp-3de...

Member Since	‎02-04-2014 02:31 PM
Date Last Visited	‎03-14-2019 11:42 PM
Posts	23
Total Helpful Votes Received	5

User Statistics

User Activity

L2PT VPN ASA 5525 microsoft client

BGP not advertising connected routes

MPLS integration to existing VRFs

VPN overlapping subnets

Unified Attendent Console switchboard unable to blind transfer

Re: BGP not advertising connected routes

Re: BGP not advertising connected routes

Re: MPLS integration to existing VRFs

Re: MPLS integration to existing VRFs

Thanks for the response Rahul