I have a WAP321 with 2 SSID's. One is for local access and another for guest. The WAP connects to a 3550 and it's port is set todescription Cisco Wirelessswitchport trunk encapsulation dot1qswitchport trunk allowed vlan 1,20switc...
Thank You Eric.I already had the two VLANs so I changed the management VLAN to 20 and left my untagged to 1. 20 is my Guest Only. After I tried to connect externally by pinging the gateway and it still failed. BUT when I went to check the configur...
