Hi,   I configured a VG 224 and it has dial tone but the first portis showing as unregistered but that port has dial tone. I made sure to configure port 0 as well. The name and number is showing up when I try to call the analog phone. It is set up for MGCP. Any ideas? The phones are not installed yet but I'm worried once they are the first line will not work. Also the port is shown as having an IP address.   Thanks, Brian C. ... View more

                   I am trying out Prime Assurance 10 trial and I can't get the web page to come up. I can ping the IP address and I can ping out of it to the network but the URL won't show up. I accidentally installed Prime Provisioning before this and that came up fine. I'm not sure if there is something that I'm missing about assurance that I need to know. Anybody? Thanks, Brian Cangero ... View more

Please see my modem recovery config below If I change rssi onset-threshold to -60 would th modem try to automatically reconnect to the provider? Is there other way I can improve the modem link recovery setup in case of poor connections?                controller Cellular 0 lte modem link-recovery enable lte modem link-recovery rssi onset-threshold -110 lte modem link-recovery monitor-timer 60 lte modem link-recovery wait-timer 10 lte modem link-recovery debounce-count 6 ... View more