Hi I have to create connectivity for an external phone system say port 50000-51000 UDP from outside to a single host inside.
I would like to map the whole UDP port range range from outside (hitting the external interface) to inside (pabx host 192....
Hi,
if you have multiple agents sharing phones dues to rotating shift:
a) Is UCCX licensed per individual agent OR on simultaneous/concurrent logins ?
b) Do agents usually login to PC and then EM into phone and then login to Finesse??? Is there a...
I have a DX70 with no UCM running sipdx70.10-2-1D6-9DEV
I want to convert to CE. I have tried changing TFTP server to upgrade.cisco.com or 35.185.22.200 as per doco but it says on bottom left of screen "Unsupported Model. Upgrading"
I then read ...
HI we have an ASA 5510 with 8.4(7) with many working IPsec VPNS.
We have one new peer we are trying to connect but when they initiate VPN we do n ot respond.
I can see incoming IKE with destination UDP port 500 but SOURCE PORT is a high port eq ...
i am trying to analyse some phones logs (from the 8845 phone itself) and i cannot understand how they are ordered?
I want to see some current activity say in the last 5 miinutes to see why a phone was sending a SIP BYE when user hits the headset ...
Yes i have upgraded many phones this way but the DX70 will not update.
For starters, i see no incoming UDP 69 TFTP. I only see on my tftp server, tcp 6970 tcp connection attempts from the DX70
hi Patrick,
thanks for your responses.
Yes we turned on crypto isakmp nat-t last week. I thought that was going to fix but did not.
I saw this bug below but our match address is a public IP and matched vpn traffic acl are 192.168 addresses so not...
