This is an old thread now but I wanted to throw out there that the I2C BUS is hardware that has had software issues with overly aggressive timers, etc in the past. However, just because you are having issues on the I2C BUS does not mean that it is a ...
Hello, Per VMware KB all 5.5 drivers are 6.0 compatible you just don't get the 6.0 features: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2111492 Thanks, Justin
Hello, This might be a better conversation to have with VMware. From the looking around I did though it does not appear it is possible to remove digital signature checking from VUM:https://supportforums.cisco.com/discussion/11684486/ucs-vic1240-vsphe...
Hello, Please see the following link for additional information:https://supportforums.cisco.com/discussion/11322751/ntp-problem-nexus-7000 http://jeffostermiller.blogspot.com/2011/09/nexus-7000-ntp-sourced-from-non-default.html http://www.cisco.com/c...
Hello,Note: If the drivers require a signature verification, run this command with the --no-sig-check switch. Ensure that you use the full path to the file. This should get you around the issue. Thanks,Justin