About jonathan.schott

jonathan.schott · 03-06-2014

Hi CommunityI have two WAP121 with latest FW and I setup the scheduler according help and documentation to disable our secondary guest network in non-office hours. The problem is that it's still always enabled. I just can't make it work. Below are my...

jonathan.schott · 03-06-2014

Thanks for the hint. However, the device has been power cycled multiple times afterward and still, the scheduler does not work. Any other idea?JonathanSent from Cisco Technical Support iPhone App

jonathan.schott · 02-14-2014

Hi Andrew,I know this question is quite old, but I finally found the solution (and explanation) for this. It works as you require and very easy!See my answer in the following thread: http://supportforums.cisco.com/message/3915572#4166596Best regards,...

jonathan.schott · 02-14-2014

Hi MarcinI faced exactly the same problem as you and nearly went crazy. I also went through all the posts here on cisco support forums, but nobody seems to have got it right. Then I read Tom's post above and the material on the Netgear site and I ma...

Member Since	‎02-14-2014 07:54 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	4

User Statistics

User Activity

WAP121 scheduler not working

Re: WAP121 scheduler not working

Cisco SG200-50/SG300-52/SG300-28 Vlan questions

VLAN setup on SG-200-26P