Que tal @ronaldc
Ese log es esperado ya que el AP está esperando obtener IP por DHCP. También es esperado que el AP resetee su interfaz constantemente hasta que no la obtenga, dado que lo primero que busca un AP ya sea en modo lightweigth o EWC (E...
Bonjour Solanin,
Il faudrait configurer de manière statique l'IP de gestion du contrôleur sur le point d'accès (AP) à l'aide de la commande suivante :capwap ap primary-base <WLC sysname> <WLC IP>
Vous devez vous assurer que le point d'accès (AP) es...
Hey Mohamed,
Regarding your question number 3)
In 8.2.x and above, FlexConnect mode APs could run FRA as well, then if the AP is in Flex and also running FRA Serving clients, Radio Role would be shown as "remote", this is:
- If AP is in flex, r...
Hello Ahmed,Can you get next output from 5508 regarding the 2701 AP? You need AP's MAC address"show ap join stats detailed <AP Ethernet MAC>"You can get AP's Ethernet MAC by using "show ap summary"This may give you an initial idea about a reason for ...
