About deocampo.acevirgil

deocampo.acevirgil · 07-25-2023

I need to setup the codec pro with 2 monitors connected (HDMI 1 and 2).I want this to achieve:1. When in call (no prensentation), local camera view will show in monitor 1 and far end in monitor 2.2. When there is presentation, local camera view and f...

deocampo.acevirgil · 02-26-2014

Hi,We are integrating VCS Control and CUCM via SIP trunk for video endpoints registered on the VCSc and IP phones registered on the CUCM to be able to communicate.VCS endpoints dial plan: 49xxCUCM IP phone dial plan: 797xxxxIP address of CUCM peers: ...

deocampo.acevirgil · 02-18-2014

Hi,We have deployed VCS Control with VCS Expressway for firewall traversal and encountered issue. On the VCSe call status, it says 403 forbiddenwhen an external endpoint registered as SIP on the VCSe will initiate a call to an internal endpoint regi...

deocampo.acevirgil · 02-28-2014

Hi Patrick,I tried to set the profile zone to Custom and now it works fine. We fully established the connection between CUCM and VCS. Calls from IP phone on CUCM to video endpoint on VCS and vise versa is working well.Just to share the VCS configurat...

deocampo.acevirgil · 02-26-2014

Hi Chris,Here's the current configuration:Authentication policy: Do not check credentialsSIP authentication trust mode: OffThanks,Acevirgil

deocampo.acevirgil · 02-18-2014

Hi Daniel,Thank you for some inputs and recommendations.Default Zones, subzones authentication policy on both VCS are set to "Check credentials" except for Traversal zone set as "do not check credentials/treat as authenticated" on the servers.Yeah, y...

deocampo.acevirgil · 02-18-2014

Hi Patrick,All authentication should be on the VCS Control. No zubzones yet for Jabber users.Do we need to create subzones for jabber users on the Control or in Expressway?Thanks,Acevirgil

deocampo.acevirgil · 02-18-2014

Hi Patrick,On the VCS Control:Default subzone: check credentialDefault zone: check credentialTraversal zone: check credentialOn the VCS Control:Default subzone: do check credentialDefault zone: do check credentialTraversal zone: do not check credenti...

Member Since	‎02-18-2014 08:12 AM
Date Last Visited	‎01-13-2024 04:29 AM
Posts	12

User Statistics

User Activity

dual display setup for codec pro

VCS and CUCM SIP Trunk Issue

Traversal Call Issue - 403 Forbidden

VCS and CUCM SIP Trunk Issue

VCS and CUCM SIP Trunk Issue

Re: Traversal Call Issue - 403 Forbidden

Traversal Call Issue - 403 Forbidden

Traversal Call Issue - 403 Forbidden