I would like to dynamically assign a 10.1.1.0 /26 network to VLAN 1 on my DHCP server, is it possible to do this on the Cisco ASA 5500 or should I do this only on the server?Regards,
Searching on the web, found this:DHCP Router Config conft# interface fa0/0 conft# ip address 200.1.1.2 255.255.255.0conft# no shutdown(config)# ip dhcp excluded-address 172.16.1.1 172.16.1.9(config)# ip dhcp excluded-address 172.16.2.1 172.16.2.9(c...
