emily00001
Level 1
Level 1
Member since ‎02-23-2014
‎08-18-2017

User Statistics

  • 68 Posts
  • 0 Solutions
  • 55 Helpful votes Given
  • 10 Helpful votes Received
Recent Badges
10 Helpful Vote
1 Helpful Vote
10 Replies
5 Replies
20 Replies

User Activity

Mar  1 18:44:10 wlc.sup46 Cisco_ac: <mac>: *Dot1x_NW_MsgTask_0: Mar 01 17:44:05.667: %PEM-6-QVLAN_INTF_REMAP: pem_api.c:1836 Remapping interface ID for <mac> from 12 to 13 (ifname). Mar  1 18:44:12 wlc.sup46 Cisco_ac: <mac>: *DHCP Socket Task: Mar 01...
I figured I'd post this as it has me confused. I have a a mix of 2800 and 2700 connected to a 2504 with software 8.3.104.131 (Beta). To my surprise I found an AP stating it's power level is 8. Is that even possible? The AP is a 2800 with the dual-ban...
I have an ASA5516X running 9.5(3) without a VPN configuration but a user pointed out to me that she needs to reconnect her Anyconnect VPN after computer sleeps when on a WLAN passing traffic through the aforementioned ASA while the problem isn't pre...
If I have a WLAN set to use an interface group with two interfaces and I have it setup without flexconnect functionality. All APs are set to flex connect. Some clients on the non-flexconnect WLAN end up on the VLANs (not in the interface group) that ...
I'm on a 2504 and had Global Multicast Mode set to on. This worked on all the controllers WLANs. On the guest WLAN I enabled P2P blocking but noted that the multicast was still active there. I tried to disable the Global Multicast Mode on the control...
Community Statistics
Member Since ‎02-23-2014 02:34 AM
Date Last Visited ‎08-18-2017 04:01 AM
Posts 68
Total Helpful Votes Received 10
Helpful Votes From
Helpful Votes Given To