About tthomast04

tthomast04 · 07-17-2014

We have a few Cisco 7960s that currently have MGCP 7-6-0 and would like to convert them to SIP. We have factory defaulted the phones and pointed the tftp ip to our tftp server. Files in the tftp server:OS79XX.TXTP0S3-07-5-00.binP0S3-07-5-00.loadsP0S3...

tthomast04 · 04-21-2014

We are looking to deploy either the 500 series or the Catalyst series switches in a multi tenant environment.Requirements:We need to be able to throttle at the port level. This is for a multi-tenant environment where certain customers will pay for di...

tthomast04 · 02-24-2014

I have a question about best practice to priotize voice packets on the LAN side.We have everything configured on the firewall/edge device for voice prioritization, however I am unsure of the exact steps to take on the LAN side to make sure that traff...

tthomast04 · 02-26-2014

The computer are on the native vlan 1 and the phones are on vlan 10. Smartport is disabled. Isn't there a setting to tell it that vlan10 get's priority over everything else, etc?

tthomast04 · 02-25-2014

I have manually tagged the phones on 10, however how does the switch know to get priority to vlan 10 if congestions, etc occurs? Thanks,

Member Since	‎02-24-2014 07:21 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	5

User Statistics

User Activity

Cisco 7960 MGCP to SIP

Cisco 500 Series or Catalyst Series - Port Throttling for Multi-Tenant

Cisco 300 QoS for VoIP

Cisco 300 QoS for VoIP

Cisco 300 QoS for VoIP