About Nathaniel Wood

Nathaniel Wood · 08-18-2015

Hello CSC World!I've got an interesting issue happening in a wireless environment where wireless throughput slows down to a crawl when I set WLAN's to use the management interface on the WLC.When my test network is associated with the management inte...

Nathaniel Wood · 05-07-2015

Hello CSC World!I just came across an issue where our pair of ASA5525 devices are syncing but showing a "failed" state when issuing the show fail command. Here is the output of the show fail command:Failover On Failover unit SecondaryFailover LAN In...

Nathaniel Wood · 02-26-2015

Hello Everyone,I've recently run into an issue that I haven't experienced before, and I can't find any information specific to my particular issue. I recently had to allow any any access from our internal network to a server on our DMZ as the develop...

Nathaniel Wood · 01-27-2015

My company is currently testing out dual factor authentication for specific users. To authenticate we use SecureAuth keys and an existing AD server which is also used to authenticate for our other VPN groups. Because of this members in the dual auth ...

Nathaniel Wood · 02-26-2014

Hey Everyone,I have recently deployed PI 2.0, and I am wondering if what I would like to do can be done.I have approximately 1,000 AP's deployed in various retail locations and was hoping I could group them all together into one group so that I can s...

Nathaniel Wood · 05-10-2016

It sounds like you are hitting a bug that I have seen in a couple of ASA's. I can't remember the bug ID, but to sum it up the inbound/outbound packets over the IPSEC tunnel would use different SPI's (Security Parameter Index) than what they should ac...

Nathaniel Wood · 05-07-2015

Hi Marvin, Thanks for the quick response, that has done the trick!I overlooked the IPS as the issue as all the other interfaces were showing No Link (Waiting) and thought the issue was somewhere on the actual uplinks.Makes sense that if the data plan...

Nathaniel Wood · 02-26-2015

Hi Jon, I appreciate your courtesy, but I won't get offended especially if it's something I overlooked. Sometimes a fresh set of eyes is all that is needed.That being said - those three statements at the top of the ACL are what should be catching the...

Nathaniel Wood · 02-26-2015

Hi Jon,Yes, the traffic is sourced from those hosts to the specific host of .44 over TCP port 389 and UDP port 53 which according to the syntax in the ASA is ldap and domain, respectively.I know I should be seeing hits on those lines because my "catc...

Nathaniel Wood · 01-29-2015

Hi Marvin,Thanks for your response, I really appreciate your time.I think we've narrowed down the issue to the configuration on the secondary authentication server. Right now it's allowing anyone within our AD to register on that server as opposed to...

Member Since	‎02-26-2014 11:22 AM
Date Last Visited	‎09-20-2018 06:35 AM
Posts	13

User Statistics

User Activity

Slow Throughput when traversing management interface

ASA Failover Failure

Access List not Catching Traffic

ASA Dual Factor Authentication Only

Grouping AP's together in PI 2.0

It sounds like you are

Hi Marvin, Thanks for the

Hi Jon, I appreciate your

Hi Jon,Yes, the traffic is

Hi Marvin,Thanks for your