About kstharunraj

kstharunraj · 06-02-2014

Do we need Self Signed Certificate in AP 2602I for registering it into WLC 5508?I'm planning to convert stand alone SAP2602I into CAP2602I then connect it into remote WLC via flex connect local switching.

kstharunraj · 05-21-2014

Is it possible to convert AIR-SAP2602I to LWAP? I want to connect it to the WLC 5508 via flex ctonnect mode. What all are the LWAP models supported by the WLC 5508. I couldn't find these details in 5508 data sheet

kstharunraj · 03-08-2014

1) What basis we choose the number of ports in a centralized WLC 5508 for port aggregation in the case of both local as well as centralized switching?2) Does WLC 5508 support different SSIDs in flex connect mode? (some of the spoke sites uses SSID A,...

kstharunraj · 03-02-2014

Is there any separate licencse require for centralized WLC 5508 deployment?

kstharunraj · 06-02-2014

Thanks a lot Sandeep

kstharunraj · 03-11-2014

That's true, we can always depend on trail & error process. However, just want to know, how much average traffic (not actual traffic) can be generated b/w WLC & LWAP. If anybody read in cisco documents, please let me know. If we figure out this, we ...

kstharunraj · 03-10-2014

Thanks Rasika!In the case of local switching the wireless traffic won't go to WLC. Hence how do we select the number of ports for aggregation. Then I believe, it depends on how many APs are connected to the centralized AP. so per AP how much bw is re...

Member Since	‎03-02-2014 04:26 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	7

User Statistics

User Activity

SSC for 2600 AP

2602I stand alone to LWAP conversion

WLC 5508 Flex connect mode

WLC 5508 Flex connect

Thanks a lot Sandeep

That's true, we can always

Thanks Rasika!In the case of