I have two BE7K M4 servers, one hosting my publishers for CUCM, CUC, and CER, as well as one CUCM subscriber; and the other hosting subscribers for CUCM, CUC, and CER. All VMs are v11.5. About a month ago, the M4 hosting the subscribers died due to a...
Our organization has recently outgrown the dial plan I implemented in 2000 (yes, Y2K!). I knew it was coming, but I thought I had more time. Now it's here. I've been using four-digit dialing internally, and assigning voicemail-only (no physical phone...
I have a Cisco 2811 router with a T1 card that serviced a PRI. It was configured as an MGCP gateway. Caller ID Name and Number worked fine. I replaced it with an ISR4331 but configured it as an h.323 gateway. After placing the 4331 in service, incomi...
First, I work for a public school system so my explanation is based on that of a campus. A decade ago I setup Auto Attendants on what was then simply Unity 4.x to work with CallManager 4.x so callers could route themselves to key personnel or press 0...
I have been managing Cisco VoIP since v4, and even managed Cisco Unity up through v5. Then I migrated over to Exchange Unified Massaging for about a decade. Now that Microsoft has bailed on UM and we wanted to move our mailboxes to Exchange Online, I...
I did see this page but thought I saw another indicating mixed support for 8. Regardless, move all VMs to ESXi 7U3i then upgrade from 11.5 to 15 via Fresh Install with Data Import (V2V), then upgrade to ESXi 8? That seems the path forward.
I installed isr4300-universalk9_npe.17.06.04.SPA.bin as instructed. From show run | include boot I getboot-start-markerboot system flash:isr4300-universalk9.17.06.04.SPA.binboot-end-markerlicense boot suite AdvUCSuiteK9I do see what you're referencin...
