HiI have been studying about UCS b-series, and I have a doubt regarding to the port personalities, what is the difference between the uplink port and the FCoE uplink port??
Hello Scott_22,
In a vPC domain the device in charge of processing and sending BPDUs is the vPC primary, even if the root is the secondary switch, what happens in this scenario is that when the secondary switch in the vPC (the root), receives a BPD...
Hello Brju,
The answer to your question is no, if you are running OTV in unicast mode IGMP is not involved, instead OTV will use an adjacency server to build up the adjacency between sites.
An adjacency server is responsible for informing all the ...
Seek,
Doing some investigation I found that this is possible but when connecting a FEX to a Nexus 7k, see below:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus2000/sw/configuration/guide/rel_6_2/b_Cisco_Nexus_2000_Series_NX-OS_Fa...
Hello Seek,
Regarding to your query, the N2K-C2248TP-E-1GE does not support L3 in the HIF(host interfaces), with the L3 module (L3 ASIC) installed in the 5k, just the 5k interfaces are allowed to be configured with L3, that is a hardware limitation...
