About siempreperligroso

siempreperligroso · 07-21-2014

Hi,I wonder if it is possible to limit the data rate (bandwidth) on a single port in SG500-28 switch? If yes how can I do it. A thorough description would be useful.Thanks in advance

siempreperligroso · 03-28-2014

Hi,I am see the following error in the system log of my SG 500 Cisco switch:%IPADTBL-N-IPDUPLICATE: Duplicate IP address 192.168.0.1 from MAC 00:xx:xx:12:43:2e was detected on VLAN 200, port gi1/26, aggregated (4) When this error occurs, the PC conne...

siempreperligroso · 03-01-2014

Hi,First of all, this is my first post in here, I hope someone can help me, and please be patient since I am very little experienced.OK, so let me explain you the scenarion that I am facing and hopefully someone will be able to help me.We have a Cisc...

siempreperligroso · 03-10-2014

Any ide why am I getting "Duplicate IP address 192.168.0.1 from MAC 00:1a:8c:xx:xx:xx was detected on VLAN 200, port gi1/26" ; This MAC address belongs to the interface for VLAN 200 on my Sophos router/firewall.

siempreperligroso · 03-10-2014

Hi again Nagaraja,How can I achieve "you need to configure a default route, next hop address pointing to the Sophos interface IP address."The web interface does not allow me to check/uncheck and change the current routes, pls check attachmentThanks,D

siempreperligroso · 03-10-2014

Tom,Where is the part about the access control lists? It is gone, I guess due to the new UI of supportforums?

siempreperligroso · 03-06-2014

Hi Tom, My ip for VLAN 200 (where the Wifi access point is connected) is: 192.168.0.1I creted one netwrok pool according to that: it is in the attachment, can you confirm if it is OK?Now I want to isolate the devices connected to VLAN 200, not to be ...

siempreperligroso · 03-06-2014

I just want to report back for an issue that I encountered.My current port configuration is as follows:port 13 - access - VLAN 200port 26 - trunk - tagged member VLAN200, untagged member VLAN 1 (default VLAN)The switch is router mode.This setup would...

Member Since	‎03-01-2014 01:48 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	12

User Statistics

User Activity

limiting data rate sg500-28

Solve the Duplicate IP error in Cisco SG 500 switch

How to set up VLANs for Cisco SG500 - 28 switch

Any ide why am I getting

Hi again Nagaraja,How can I

Tom,Where is the part about

How to set up VLANs for Cisco SG500 - 28 switch

How to set up VLANs for Cisco SG500 - 28 switch