Hi!So, I have a Cisco IPS-4260 that is not finding a boot device.. My research indicates the "IPS 4260 uses a flash device for storage rather than a hard-disk drive" My question is, Where is the flash device and what exactly is it? I don'...
Adil,If you are able to access the ASA, you can turn off filtering..The following example shows how to remove ActiveX filtering:hostname(config)# no filter activex 80 0 0 0 0More info here;http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/confi...
I've worked with a couple Aironets in my day, But I'll admit I haven't worked directly with the Aironet 1552How do you have it "set in autonomous mode? I do know that k9w8 versions of the software are Lightweight versions and need a controller to fun...
I'm assuming this is a ASA firewall?The ASA does in fact block ActiveX.. I think it's a "filtering" command..If you can provide more details I'll try to point you in the right direction, or you can try a google search for ASA ActiveX filtering.
Looks like you only have a little over 69MB left.. What is the total size of your memory? Cisco recommends you have 512MB total for your ASA..You can read the info I found here: http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyc...