HI
I have a problem with C6800.
I configured the DHCP service but the vrf VRF-A command does not exist?
ip dhcp excluded-address 10.xx.xx.1
ip dhcp pool VoIP_UC14_V254
network 10.xx.xx.0 255.255.255.0
default-router 10.xx.xx.1
option 150 ...
Hi everyoneI have a problem with an HSRP setup on ASR9K with ISO version 6.2.3.I configured HSRP between two routers, ASR9K and ASR 903 on BDI interface, below is the configuration:
Configuration ASR9K
interface TenGigE0/2/0/12.771 l2transport
de...
Hi everyoneI have a problem with updating EPN manager.In my network I already have an EPN server installed as primary with version 5.1.
We are installing a second server in HA mode, this has been configured as a slave, the two servers are version mis...
I saw that on the ASR900 router the shutdown command exists while in XR it doesn't.
ASR903(config-if)#standby 100 track 100 ?
decrement Priority decrement
shutdown Shutdown group
<cr> <cr>
ASR9000(config)#router hsrp interface bvI 771 ...
