About nshinde01

nshinde01 · 02-22-2016

What happens when an ASA receives a VPN initiation request from a remote end (AWS) from a secondary connection. Will ASA try to form VPN tunnel with primary IP or secondary IP? ASA has sort of following configuration (putting only relevant configura...

nshinde01 · 01-15-2016

Hello Experts, I have a stack of 4 cisco 3750 switches and its making lot of noise since last one week. Please have a look at the outputs belowS3N-100-ASW1#sh env all FAN 1 is OK FAN 2 is OK FAN PS-1 is OK FAN PS-2 is NOT PRESENT SYSTEM TEMPERATURE i...

nshinde01 · 01-07-2016

Hello Experts, When I am trying to establish a tunnel between 2 ASAs, its not building up. I ran some crypto debugs and came across following error message. Jan 07 2016 05:18:20: %ASA-5-713050: Group = X.X.X.X, IP = X.X.X.X Connection terminated for ...

nshinde01 · 10-30-2015

I have a Cisco ASA 5525-X, with 2 ISPs (Consider X and Y). I want to use both of them for loadbalancing, but the issue is I have a site to site VPN over ISP-X. As per my understanding, if my PBR routes my VPN interested traffic through ISP-Y, it wou...

nshinde01 · 06-02-2015

Getting a log in my 3850 switch, need to know what does it mean as i have found nothing on cisco document.

nshinde01 · 02-23-2016

Documentation says, by default the mode is 'Bidirectional'. http://www.cisco.com/c/en/us/td/docs/security/asa/asa-command-reference/A-H/cmdref1/c6.html#pgfId-2477607Also I could confirm it using command sh run all crypto map I put it over here, so th...

nshinde01 · 02-23-2016

Could you please also let me know, what would be the default connection type for the above ASA (having 2 peers listed inside same crypto map sequence) Originate Answer-only Bidirectional I could not find it from CLI and guessing it is working in '...

nshinde01 · 02-22-2016

Thanks for your response. I understood, how ASA initiates the traffic and establishes the tunnel. But in case when ASA is responder and assume traffic is coming from other end primary connection but ASA has listed it as secondary peer, then how ASA w...

nshinde01 · 01-15-2016

Output confirms that I have a power-supply failure, right? Do I need to replace it or just a power-cycle/reboot will solve it?

nshinde01 · 01-07-2016

As my tunnel is UP. I can confirm, we do need to call translated subnets in crypto ACL even if its policy PAT. Thank you very much for your assistance

Member Since	‎03-22-2014 11:30 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	20
Total Helpful Votes Received	1

User Statistics

User Activity

ASA SiteToSite Tunnel with DUAL ISP

3750 Switch Stack Making Noise

ASA SiteToSite Tunnel Issue

Cisco ASA PBR forwarding

What does it mean "SPI(FED QoS) server dead"?

Documentation says, by

Could you please also let me

Thanks for your response. I

Output confirms that I have a

As my tunnel is UP. I can