About webquake_support

webquake_support · 10-22-2017

This is a big issue here when German Windows Servers are involved (Domain = Domäne). We are encountering this since 6.1 - now we have upgraded to 6.2.2 - still the same. Is there any information in which version this will be fixed?

webquake_support · 11-12-2016

This is a really bad bug. There is no evidence about the circumstances, the SYN-ACK package vanishes silently. Usually you test the VPN with PING which is perfectly working, as it is with DNS (udp). TCP traffic is entirely timing out. Anyconnect clie...

webquake_support · 11-17-2015

In the middle of total boredome we spent hours with the new unprimed universal access points (AIR-AP3702I-UXK9) combined with some of the attractively priced mobility bundles... SCENARIO: If you just use the unprimed AP and connect it, it joins the c...

webquake_support · 11-14-2016

Again thank you for your quick answer. I'm just wondering that it takes until December. The initial 9.6(2) is from August. Maybe I underestimate the impact to fix it, because the Anyconnect Client in this scenario is perfectly running. Isn't a large ...

webquake_support · 11-14-2016

Thank you, Palani. Just one question - will it be resolved in the 9.6(2) trail or will there be a 9.6(3) ? Regards, Chris

webquake_support · 01-02-2015

Check out https://supportforums.cisco.com/discussion/11312726/monitor-registered-aps-2504-snmp

If you want to get the total · 01-02-2015

If you want to get the total number of Clients, use: .1.3.6.1.4.1.9.9.618.1.8.12.0It does not work on 7.0 - it does on 7.6 and 8.0.Best regardsChristoph

webquake_support · 01-02-2015

It's an old post, but I had the same question. After some research I found a simple answer...Use this OID: .1.3.6.1.4.1.9.9.618.1.8.4.0If you want to also get the total number of Clients, use: .1.3.6.1.4.1.9.9.618.1.8.12.0It does not work on 7.0 - it...

Member Since	‎03-24-2014 03:31 AM
Date Last Visited	‎10-23-2020 12:07 AM
Posts	10
Total Helpful Votes Received	20

User Statistics

User Activity

CSCvg21478 - User/Group Downloads fail with non-ascii characters in included/excluded groups

CSCvb61056 - 9.6.2 TCP connection doesn't work through L2TP

Nightmare with unprimed Access Points

Again thank you for your

Thank you, Palani.

Check out https:/

If you want to get the total

It's an old post, but I had