Hi Wireless Team, I have a new WLC 8540's running code 8.10.105.0 where the GUI/ SSH access is lost upon saving the config successfully. Ping to the management IP works, however the GUI will not respond after selecting any config options. Eventually...
Hi All, Recently I updated the license, and currently showing mismatch of licenses. Please find the output
Base AP count license shows 27 AP's supported, however " show license capacity " doesn't show the actual license. AP's are also not joining the...
Hi All, Its been noticed the PrimeInfra is not showing the correct clients information from WLC when doing a live thsoot. Has anyone noticed this issue before and is there any fix for it ?
Thanks
I have isolated the issue. It only happens when the Radius server "Management" box is checked. I'm currently usinng local credentails. When the management is checked the following log appears %CLI-3-LOGIN_FAILED: cliutil.c:651 Login failed. User:Pres...
Hi, Today I had done the CIMC upgrade and have got the same message " Cisco bootloader loading stage 2". This message is actually normal and doesn't represent the firmware is loading. After I mapped the IOS file and rebooted ,this would show the C...
Hi, Today I had done the CIMC upgrade and have got the same message " Cisco bootloader loading stage 2". This message is actually normal and doesn't represent the firmware is loading. After I mapped the IOS file and rebooted ,this would show the C...
CMX Location is not accessible.
This site can’t be reached
cmxlocationsandbox.cisco.com took too long to respond.
Try:
Checking the connectionChecking the proxy and the firewallRunning Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT
...
HI @Flavio Miranda
Thanks for the quick response.
Have you faced any issue when running config archives ? ( controller creds failure - found lot of bugs related to it) Not sure when cisco going to fix it.> Tested this in lab environment, where I co...
