About jimhood82

jimhood82 · 04-02-2014

I have a somewhat older 1712 I picked up, understanding that it should do what I am looking for.I have a 5 IP block from my provider that I need to map out 1:1. The way I understand this is to first assign the interfaces their IP address, then create...

jimhood82 · 04-02-2014

Ok, it doesn't show any details, just the number of hits - and yes, zero hits on the return interface, with 100+ on the outgoing interface. I did manage to prove the router is working though - by using a PC with the gateway address and testing connec...

jimhood82 · 04-02-2014

Ok, there are several matches on the outgoing interface, but none on the incoming interface.But my question here, is what are we learning from this that we did not already know? So far as I can tell - the router is the issue - not thier equipment.The...

jimhood82 · 04-02-2014

Ok, applied the list - no change in status.Can still ping local network, and not the gateway or remote network.

jimhood82 · 04-02-2014

I gave it the command change-register 0x2102, then saved and reloaded - it started back up in 0x3922... EDIT: Trying again using Rommon to make the change. EDIT 2: Yep - that did it! Got it to 0x2102. Sadly, no change in behavior - only console line ...

jimhood82 · 04-02-2014

Yes, and I did call and confirm that as well. I have also confirmed that all addresses are working correctly when directly connected.

Member Since	‎04-01-2014 06:52 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

Multiple External IP static routes on older 1700

Ok, it doesn't show any

Ok, there are several matches

Ok, applied the list - no

I gave it the command change

Yes, and I did call and