About oussamabachiri1

oussamabachiri1 · 04-22-2014

Hi, everyone well i encountered a gateway config with some voice translation rule which are configured but not used within any profiles or anything they just exist for what reason they could????? here they are: voice translation-rule 1 rule 1 /\(^.....

oussamabachiri1 · 04-03-2014

Hi guys,I'm working on a project for a business implemention of Cisco Unified Communication BE6Kand i'm using Gateway Router 2911 connected to the PSTN, and i need to implement the DID functionalityin a way that the mapping of DN(Directory Numbers) a...

oussamabachiri1 · 04-22-2014

don't worry i check like million time i even Ctrl+F there number it only appears where they are configured at the top , no where in a voice port or a dial-peer :)

oussamabachiri1 · 04-22-2014

Thanks manish, so there useless :)

oussamabachiri1 · 04-06-2014

Hi, what is always recommonded is to have a site code ex site 1 code : 11 and site 2 code : 12 and have an intersite accss code as for "8" , this is the best way #CCVP and good luck

oussamabachiri1 · 04-03-2014

try to have the meeting place a ipv4_add and make the incoming PSTN calls leave as outgoing to the target as the ip of the meeting place.

oussamabachiri1 · 04-03-2014

No, i don't say without preconfiguring.what i'm saying is that if i need it to be configured, it will have to be at a higher level say an interface that someone with no IT exp will do it. then he or she will be able to point a DIDx>>>DNx just witha ...

Member Since	‎04-03-2014 07:34 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

Voice Translation rule

CCVP Direct Inward Dialing - Dynamic

don't worry i check like

Thanks manish, so there

Hi, what is always

try to have the meeting place

No, i don't say without