About adelium904

adelium904 · 07-31-2021

Hi,I have a dual stack IPV4/IPV6 router/firewall (C892FSP-K9).I configured IPV6. The thing is that IPV6 is not working as expected.The router is behind a French box (Free) giving Internet access. The symptom:No incoming traffic is going through the r...

adelium904 · 03-15-2021

Hi,I have set up filter for the inbound interface on the wan part.I permit www and 443 traffic from any to a specific host (2A01:XXXX:XXXX:C884:8000::1).I get the following error on the browser:<html><head><title>Service Unavailable</title></head> <b...

adelium904 · 06-25-2017

Hi I have a strange situation with my DHCP pool. As you can see below, I made some reservation for the first 3 devices. The thing I do not understand is that the devices get another IP address? Moreover, their Mac address is transfomed: From 008e.713...

adelium904 · 05-02-2014

Hi,I need to link 2 sites together.My internet providers does not provide VPN passthrough (ESP) protocol or the possibility to put the modem or boxes in bridge mode. Look at the following discussion for more details. https://supportforums.cisco.com/d...

adelium904 · 04-25-2014

Hi, I have tryed to set up a tunnel between my 2 sites using GRE and IPSec technologies.It does not work. I would like to know where I am wrong???In the attached file, You will find all the details of the network with figures. As some people will s...

adelium904 · 08-07-2021

Hi, Sorry for late reply.I found the solution, the problem came from the fact that I did not have default route ::/0.The ACL I had blocked automatic routing negotiation between the router and the box.Here is the ACL I had to apply to allow automatic ...

adelium904 · 08-07-2021

Hi ngkin2010,thanks for the help.I have to do like this: permit icmp FE80::/10 any nd-na permit icmp FE80::/10 any nd-ns permit icmp FF02::/16 any router-advertisement permit icmp FE80::/10 FF02::/16 router-advertisemenIf I do not put the last lin...

adelium904 · 08-06-2021

Hi ngkin2010It does not work, the default route is not shoing???vandman

adelium904 · 08-06-2021

Hi,I think I found the problem.When I remove the ipv6in ACL, I get from my box the default route to internet:ND ::/0 [2/0] via FE80::XXXX:XXXX:XXXX:XXXX, GigabitEthernet9When I set the ACL, I loose the route.I must miss some command. I am not s...

adelium904 · 03-15-2021

Hi,From local network, it works perfectly well. In debug mode, Traefik gives me logs, the website shows itself in the browser.From Internet, I have no logs in Traefik???For me, No traffic goes to the service.This is wearied.Regardsvandman

Member Since	‎04-12-2014 08:02 AM
Date Last Visited	‎08-08-2021 10:45 AM
Posts	24

User Statistics

User Activity

Blocked IPV6 traffic

IPV6 ACL permit but not working on C892FSP-K9???

DHCP trouble

Tunnel Site-to-Site VPN or Not

VPN Ipsec not working - (SOLVED)

Re: IPV6 ACL permit but not working on C892FSP-K9???

Re: Blocked IPV6 traffic

Re: Blocked IPV6 traffic

Re: Blocked IPV6 traffic

Re: IPV6 ACL permit but not working on C892FSP-K9???