Hello JosephI want to calculate sum of input and output bytes per port.I did a test: I work with command "show interface f0/0", this command shows us a sentence contains input end output bytes, now if my method is correct how do I extract the value o...
that is to say, I want to make a EEM script that gives me incoming traffic and outgoing traffic and finally I give her total traffic calculation this is my mentor who give me this works but I do not know how. Josph thank you for helping me.
Hello ashirk your script "high-cpu" gives me no result, when I put "sh flash" it shows me " "Open device slot0 failed (Bad device info block)" And I want to create a script to display a traffic interface but I not know how . you can help me?
when I executed the command "sh archive log config all", I don't find anythingand I get an error " %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:!exec: enable "
event manager applet configuration_change_manuellevent syslog pattern “.*%SYS-5-CONFIG_I.*”action 1.1 cli command “enable”action 1.2 cli command “show archive log config all”action 1.3 syslog msg "Config has been changed" I get an error with this sc...