parakiteiz

parakiteiz · 08-03-2016

1. I noticed CDP on my workstation port I could see how this could be useful using a sniffer to know...

parakiteiz · 07-13-2016

I want to upgrade the Cisco UCS 5108 (PID and SKU N20-C6508) with the following blades B200 M1 (PID:...

parakiteiz · 06-17-2016

So you only want vlan 40/subnet 10.40.40.0 to go out your firewall 2? You want all other firewall tr...

parakiteiz · 06-13-2016

I have a oob mgmt interface configured but I do not want ntp to use it. I want ntp to use what it fi...

parakiteiz · 06-13-2016

Issue: I have bad NTP on my Nexus 5548 no matter what device I point it at. I pointed it at my GPS d...

parakiteiz · 06-08-2016

You should be able to do a static route to it. Post the switch config and I can make some better sug...

parakiteiz · 05-26-2016

I have this exact same problem except I am running this IOS: cat3k_caa-universalk9.SPA.03.06.04.E.15...

parakiteiz · 03-16-2016

When I do a sh ver on my WS-3750X-24S I see this in the license portion: License level: ipbase, Lice...

parakiteiz · 11-24-2015

So I found the problem. It appears to be the version of the IOS on the switch (12.2(58)SE2 c3750e-un...

parakiteiz · 11-23-2015

I had a module line card die on me on Saturday on my 6509 and I had to plug all my access switches t...

parakiteiz · 07-14-2015

Jon isn't that statement backwards? shouldn't it be 192.168.0.16 0.0.0.3? Yes both of these question...

parakiteiz · 07-14-2015

so the changes should look like this:vlan 300name TESTSW01toCORESW01 TESTSW01int vlan 300ip add 19.1...

parakiteiz · 07-14-2015

I have a 3560 that is hooked to a 6509. The following SVI's live on the 3560: 192.168.180.1 (VLAN 18...

parakiteiz · 07-14-2015

I have a 3560 that is hooked to a 6509. The following SVI's live on the 3560: 192.168.180.1 (VLAN 18...

parakiteiz · 06-01-2015

I have a WS-C3560X-48. I want to upgrade the IOS from c3560-universalk9-mz.122-55 to c3560e-universa...

Access port issues noticed when using wireshark