Hi Jason, Option 125 is used for vendor specific information to get the following: Pilot number (also called primary or contract number), there is only one pilot number in DHCPACK, and REGISTER is done only for the pilot number Additional numbers, o...
Hi, You can configure the name and number globally on the emergency SIP trunk.As below:Caller InformationCaller ID DNCaller NameMaintain Original Caller ID DN and Caller Name in Identity Headers Or you can play with the “Calling Party Selection” opti...
Hi Alex, Yes it can be done. The Process should be similar to When an RMA is conducted.The Software activation Licenses are migrated in case of a Hardware failure to provide equivalent software functionality on the replacement router.Even though the ...
Hi Srini,I have a Questions related to your post:"If you are talking about using CUCM on premise and Exchange UM in the cloud then Cisco doesn't endorse or support it"Does this mean there is a limitation for Pointing SIP trunks from CUCM to any other...
