About Navneet_singh

Navneet_singh · 02-07-2011

Hi All, What command can we use to check the type of SFP inserted in a switch or Router? I needed to check if the blade in my 4500 switch is populated with any SFPs? Will the command be applicable for other series of Catalyst switches as well?Appreci...

Navneet_singh · 01-31-2011

Hi all, Can you please let me know if it is feasible (from a Networking perspective) to have Cisco and 3Com switches together in a LAN environment. I have a Distribution layer for one of our offices, and we have a mixture Cisco Catalyst 2960 and ...

Navneet_singh · 01-28-2011

Hi, Can you please let me know if the WS-C2960G-48TC-L switches support stacking? If yes, can they be stacked with the current WS-C2960-48TC-L switches I have in my network?I have checked the Cisco site, and it says all 2960S series support stacking....

Navneet_singh · 01-20-2011

Hi, We are rolling out a new application on our Client network, and are currently planning to upgrade the BW on the WAN links from all the spoke sites. All sites connect to the Datacenter (where the app server would be placed) through MPLS links.The ...

Navneet_singh · 02-09-2011

Hi Shashank, sh idprom interface gix/y command gives me the transceiver and connector type. This works for me..Thanks for your inputs.CheersNavneet

Navneet_singh · 02-07-2011

Thanks for your inputs guys. "Sh inv" does not show me the type of SFP installed? If it's a GLC-SX-MM or a GLC-LH-SM etc.. Also, the "sh hw-module subslot 9/0 transceiver 0 idprom" command is not supported in my switch.Is there any other command that...

Navneet_singh · 01-29-2011

Hi Elyinn, Thanks for your reply. There is no EF46 type of traffic here. The Application in question would be TCP based, and we would be using AF31 services probably, and are currently talking with the SP on the same.CheersNavneet

Navneet_singh · 01-24-2011

Hi Elyinn, Thanks for your inputs. The graphs I have attached are from a sample site for reference. But I agree with you that QoS would be a better option on links that are not saturated.As you said, 70% utilization should be a reference point. Does ...

Navneet_singh · 01-23-2011

Hi All,To further add to my query above, Iam attaching 3 BW util reports for reference. These have been taken with a time interval of 1, 5 and 15 min average. While recommending upgrade, we should always be looking at the peak point in the graph as r...

Member Since	‎01-13-2011 01:02 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	11
Total Helpful Votes Received	35

User Statistics

User Activity

Command to check SFPs

Cisco and 3Com switches - Interoperability

Stacking Feature on 2960s

WAN Testing

Re: Command to check SFPs

Re: Command to check SFPs

Re: WAN Testing

Re: WAN Testing

Re: WAN Testing