About zsmr00001

zsmr00001 · 05-28-2014

Hello,I have configured the EEM and IP SLA on router 2911 with the event "track state down".event manager applet Prueba3 event track 1 state down action 1.0 cli command "enable" action 1.1 cli command "configure terminal" action 1.2 cli command "int...

zsmr00001 · 05-27-2014

Hello,I would like to ask you if there were some trouble in applying route-maps in a interface and its subinterfaces, as it is shown:interface GigabitEthernet0/2 ip address 11.0.9.26 255.255.255.252 ip policy route-map GestionRadios!interface Gigabi...

zsmr00001 · 05-11-2014

Hello,I would like to know how I can use "set tag" in Route-map in order to lead traffic specific throug static route with "ip route". I believe that I can do the following: access-list 101 permit ip 192.168.120.0 0.0.0.255 any /* Filtering Lan Tr...

zsmr00001 · 05-09-2014

Hello,I would like you to help me with the following issue. I need to connect the following in the router 2911: gigaEthernet 0/1.20 encapsulation dot1q 20 192.168.120.0 255.255.255.0to: gigaEthernet 0/0.90 encapsulation dot1q 90 11.0.12.2 255.255.25...

zsmr00001 · 05-02-2014

Hello Friends,A Router 2911 have its Lan interface with dot1q encapsulation, my task was configure its Wan interface with dot1q encapsulation too. The point was that a vlan in Lan SubInterface had to go out through other vlan in Wan SubInterface, the...

zsmr00001 · 05-28-2014

Hello Ashirkar,I did what you wrote but it didn't work. I guess it doesn`t work because my router 2911 ask a user and password y it goes directly to privileged mode"username rsnpower2 privilege 15 secret 4 LgaZhZWEWKivYt.uo6bM87s3eMiIPtS50PDGv2K1IUA"...

zsmr00001 · 05-28-2014

Hello,Ok, Thanks. I wanted to ask you this, because someone said to me that the policy on interface overwrite the polices on subinterfaces, also I read that sometime. This router (2911) is already configured and we see that only a service has a weird...

zsmr00001 · 05-28-2014

Hello,Ok, thanks. I asked you this because I read before that the policy in interface override or overwrite the polices in subinterfaces, is that true?This device is Router 2911.Best regards,Sandro

zsmr00001 · 05-14-2014

Hello Cadet,Thanks for your feedback. Sorry, I was wrong. As you say, it looks correct. I did the mistake when I tested the ping from the Router-1 while the PRB applied to ingressing traffic and not to the generated traffic in the Router-1.I have bee...

zsmr00001 · 05-13-2014

Hello,I send a drawing and a doc with details. Thanks for your help.RegardsSandro

Member Since	‎05-02-2014 07:54 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	13

User Statistics

User Activity

Embeded Event Manager doesn't execute the cli commands

Applying "route-map" in interfaces with encapsulation dot1q

Choosing next hop for traffic specific

Connectios between subinterfaces Dot1q on Router 2911

Dot1Q Encapsulation in Wan and Lan interfaces of Router 2900

Hello Ashirkar,I did what you

Hello,Ok, Thanks. I wanted to

Hello,Ok, thanks. I asked you

Hello Cadet,Thanks for your

Hello,I send a drawing and a