Hello, I have ASR 1002-HX running on 17.3.5 (currently recommended software version). The problem is that ETA commands can't be applied on the router. From Cisco Feature Navigator I can see that ETA is supported on the ASR 1002-HX platform only on so...

Hello,I have the following deployment:- 2 sites/DCs- site1 consists of: 5 pair of Leafs, 2 spines, 1 pair of BG- site2 as above- direct peering between BGs of both sites- the deployment was done through DCNMThe above deployment is working ok and I do...

Hello,I have two FP9300 devices and each of those boxes have an old security module - slot1 (two slots are empty).Multi-instance deployment is used + HA failover FTD pair was configured between both 9300 devices.Now I want to add a brand new security...

Hello,The scenario is as follows:- two node ISE 2.7 deployment- at the moment a customer doesn't have a possibility to configure 802.1x on their switches and WLC- the final goal is to create user/group based access control on FTD firewall (6.7) From ...

I have DNAC 2.2.3.x and WLC added into its inventory running on 17.3.3.My question is related to compliance check (especially to run vs startup config).According tohttps://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-...