About Nightwolf_82

Nightwolf_82 · 08-07-2018

Hi guys, Could you please advise how do I modify source for existing tunnel. I need to replace 229.174.185.130 with 210.175.245.79. Regards

Nightwolf_82 · 09-24-2016

Hi guys, Below is my diagram: 3XXX [CUCM] --- [MGCP GTW] 61 2 33333XXX === WAN/PSTN === 1 212 5555XXX [CME] 5XXX I have this translation rule on my CME to translate called and calling parties for incoming and outgoing calls. voice translation-rule 1 ...

Nightwolf_82 · 07-27-2016

Hi guys, I'm in the process of configuring MGCP gateway and faced some issues with it. SYD-RTR#show diagSlot 0: C2811 Motherboard with 2FE and integrated VPN Port adapter, 2 ports PVDM Slot 0: 16-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughte...

Nightwolf_82 · 07-24-2016

Hi guys, Just several questions related to dial peers and rout patterns. Q1. Here are my POTS dial peers. dial-peer voice 10 pots description **10-DIGITS LOCAL DIALING** destination-pattern 9[2-9]......... port 0/0/0:15 forward-digits 10!dial-peer v...

Nightwolf_82 · 07-11-2016

Hi guys, I would highly appreciate of you could clarify some nuances about Partitions and CSSs. Even though I watched and read about it I still can't understand the way it works. For example, I created 3 Route Patterns, 5 Partitions and 4 CSSs (pls s...

Nightwolf_82 · 08-07-2018

Both 229.174.185.130 and 210.175.245.79 are IP addresses configured on the same server. I just need 210.175.245.79 to be the source address. Please, let me know if I should provide the rest of config.

Nightwolf_82 · 09-26-2016

Hi Aseem, I just followed the video by Jeremy Cioara about understanding route lists and route groups where he explains how to configure redundancy in CUCM. In his scenario users who dial extension number should be switched to PSTN in case WAN link i...

Nightwolf_82 · 09-26-2016

1. Created two Route Groups, one for WAN with SIP Trunk and MGCP Gateway and one for PSTN with MGCP Gateway. 2. Created one Route List and added both WAN and PSTN Route Groups. 3. Created Route Pattern 5XXX and specified Route List. In Route List I a...

Nightwolf_82 · 09-25-2016

Hi Aseem, Thank you for your reply. This (pls see screenshot) helped me. I am not sure if it's correct solution. BTW, I got another question. On CME I use this config to switch from SIP trunk to PSTN in case WAN link is failed. dial-peer voice 3000 v...

Nightwolf_82 · 09-24-2016

Hi guys, I have the following voice translation rule and dial peers: voice translation-rule 3 rule 1 /^$3...$$/ /6123333\1/!voice translation-profile PSTN-OUT translate called 3!voice-port 0/0/0:23 translation-profile outgoing PSTN-OUT!dial-peer vo...

Member Since	‎05-06-2014 08:50 PM
Date Last Visited	‎08-08-2018 12:02 AM
Posts	129
Total Helpful Votes Received	4

User Statistics

User Activity

Remove or Modify VPN Tunnel

Called & Calling Number Transformation with MGCP

Configuring MGCP on CUCM and gateway

Dial Peers, Route Patterns and Translation Rules

Partitions and Calling Search Spaces

Re: Remove or Modify VPN Tunnel

Hi Aseem,

1. Created two Route Groups,

Hi Aseem,

Hi guys,