About insomniacgames_nc

insomniacgames_nc · 02-24-2012

What is the switch latency for a SG302-8P for L2 and L3 packets?thanks,Carlos

insomniacgames_nc · 07-06-2010

Hi everyone,I have a remote user with an ASA-5505 which needs to establish vpn tunnels to two different ASA-5520's. The remote user has a dynamic IP for his outside address.I can configure it to work with DefaultL2LGroup for the pre-shared-key, but t...

insomniacgames_nc · 02-10-2010

Hi,Are there any advantages to still using crossover cables between newer switches which support mdix auto?Thanks,Carlos

insomniacgames_nc · 12-10-2009

Hi,I am trying to modify the an aa script to Call Redirect a call to a general voice mailbox. I can get it to work with one digit using Dial-by-Extension, but can't get aa to redirect a call if the digits dialed are 5555I also can't get trace informa...

insomniacgames_nc · 12-07-2009

I purchased the license fl-ccme-uc-5 from a reseller and all I got from Cisco was a Customer Entitlement Letter(via Fedex.) Is there something I am missing to add to my 2821 router to increase the users?Thanks,Carlos Fernandez

insomniacgames_nc · 02-10-2010

I personally do not use MDI and use crossover patches anyway since they will work on any switch. I also color code them so it's easier to find problems when a trunk goes down.I was just curious if MDI is best to stay away from if given the choice.Tha...

insomniacgames_nc · 02-10-2010

is it best practices to hard code speed and duplex onswitch to switch ports to eliminate potential problems in auto-negotiation?Thanks,Carlos

insomniacgames_nc · 12-14-2009

Turns out that I was not getting trace output since the atrace.log file is disabled by default in AIM.I also had to "trace ccn ManagerAppl" to log the executing step trace info.Thanks for pointing me in the right direction.Carlos

insomniacgames_nc · 12-11-2009

I solved my own problem...the 5555 was never being checked as the script was checking for a "5" prior as a shortcut.I still would appreciate any help in debugging cue 7.0.1 scripts.Are there any tools to step into the scripts?Carlos

insomniacgames_nc · 05-15-2009

just thought of thiswhat I need isaccess-list list_3 extended deny ip 10.100.0.0 255.255.0.0 host 65.1.1.1access-list list_3 extended permit ip 10.100.0.0 255.255.0.0 host 65.1.1.1carlos

Member Since	‎05-15-2009 06:13 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	14

User Statistics

User Activity

Switch Latency for a SG302-8P

Site-to-Site VPN with certificates

MDI on newer switches

Help with CUE script editor

upgrading cme license with fl-ccme-uc-5

Re: MDI on newer switches

Re: MDI on newer switches

Re: Help with CUE script editor

Re: Help with CUE script editor

Re: nat id order of priority