About faizanelahi

faizanelahi · 07-14-2021

Hi,We are facing one way audio connecting to a SIP provider. Callee cant hear the voice of caller, the other way is fine.I can see rx and tx packets increasing during the call.*** IP Phone - CUCM - CUBE - SIP Provider Router - SIP Server ***Provider ...

faizanelahi · 04-29-2021

Hi,We have UCCX 12.5 premium license with multiple CSQs. Customer is looking to have traffic analysis report based on the CSQ. The default report is not giving the option to filter the report based on the CSQ. Is creating a custom report is the only ...

faizanelahi · 04-07-2021

Hi,I am facing issues with call forward in CUCM 11.5. In H323 gateway page i have changed calling party selection (outbound calls) to First Redirect Number (External). Calls coming from PSTN are forwarding to mobile (PSTN) if call is not answered.How...

faizanelahi · 04-02-2021

Hi,I have initiated a task in PCD to migrate CUCM cluster 10.5 to new ESXi host with version 11.5 (new IP address). Task was successfully completed. However, none of the phones has been registered to new CUCM. Had done factory reset to the phones mul...

faizanelahi · 03-28-2021

Hi,I have integrated CUC with CUCM over SIP. If the call is not answered in 10 seconds, it will reach to voicemail. From internal extensions, its working fine. However if i dial from PSTN to Direct number which is transferred to extension, call is ge...

faizanelahi · 07-14-2021

Thank you Nithin. I have removed gi0/0/0 binding under voice service voip and binded this in PSTN dial peer (202). Issue is resolved after doing this. Is this the correct way to do ? gi0/0/1 is my internal interface which is facing to cucm.

faizanelahi · 07-14-2021

Hi Nithin, Yes, outside party not able to hear my voice. I can hear the PSTN users voice. Below is the configuration. version 16.6service timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionplatform qfp utiliz...

faizanelahi · 07-14-2021

Hi Sadav, There is no firewall in place. Yes bind command configured.We are only testing outbound calls for now and its having this issue.

faizanelahi · 04-07-2021

Yes, this is the issue am facing right now when I keep originator, PSTN calls are not forwarding.Any other thoughts to achieve both at same time.

faizanelahi · 04-02-2021

Thank you for your reply Jamie.Sure, I will plan for 12.5. Yes DHCP pool has been modified with the new CUCM IP. Still it didn't register. Any other thoughts ?? Is it anything to do with ITL files or COP files ?

Member Since	‎05-09-2014 09:02 AM
Date Last Visited	‎04-15-2022 02:09 PM
Posts	117
Total Helpful Votes Received	20

User Statistics

User Activity

CUBE - One way audio

Custom UCCX Reports

CUCM Call Forward Issue

PCD CUCM 10.5 to 11.5

CUCM to CUC SIP - PSTN Calls

Re: CUBE - One way audio

Re: CUBE - One way audio

Re: CUBE - One way audio

Re: CUCM Call Forward Issue

Re: PCD CUCM 10.5 to 11.5