Hi,
I am trying to update my ESXi from 5.5 to 6.0 using the esxcli but I receive the error -
/vmfs/volumes/4f0a37af-1ff59fa8-c5d8-001018a76a5a # esxcli software profile update -d /vmfs/volumes/4f0a37af-1ff59fa8-c5d8-
e-from-esxi6.0-6.0_update03.zip...
Hi,
Can someone please explain why can't see I the IOS image in the flash? I have also tried a factory data reset but I still cannot see the file. These are the steps I took to verify:
My priv level is 15, so I should be able to see all the files.T...
Hi, I am performing a migration from ACS to ISE. Both these devices use a Win 2012 Server as External Identity sources. The connection to the AD is made via LDAP. Here is a sample of what is happening on all the network devices: N7K# test aaa group A...
Hi,The radius packets are being dropped on my ISE deployment because the NAS IP is being detected as the SSID IP and not the IP of the WLC. I want the IP of the WLC to be the NAS IP because the WLC is what I've configured as the NAD in the ISE itself...
Hardware used: Cisco WLC 5508Cisco LWAP AIR-CAP3502I-K-K9Windows Laptop This is what the topology looks like. This is a complicated scenario involving ISE with the wireless services. The client can connect with the SSID, but no meaningful traffic i...
This was a false positive and has been rectified. The files are no longer being marked as malicious. You might have to wait a while for the endpoint cache to expire.
Hi,
You can integrate Cisco AMP with Okta, however, there's no provisioning of mapping AD groups into the console. The console has 2 user roles -> Admin and User. As the name implies, Admin has complete access whereas the User has RO access only. A...
Hi, you may raise a TAC case to find the duplicates. Otherwise, you'll have to export the CSV from the Management > Computers page and manipulate the excel sheet to find the duplicates. Once those duplicates have been found, you may delete those manu...
