Hi,   I’m looking for some help on an EIGRP issue we’re having with route advertisements over a FlexVPN between two sites. The spoke router is receiving a full routing table from the hub and this is being redistributed down to the L3 Switch but the h...

Hi I have a dead 887va router, needs  a K9 code what router could replace this which is slightly better spec, but do the same job. ie. ADSL etc.  These interface:-   controller VDSL 0 ! !interface Loopback0 ip address 10.25.254.49 255.255.255.255 no ...

Hi, We have recently encountered the standby supervisor rebooting for no apparent reason WS-C6509-E (Chassis), VS-S720-10G (Module-SUP).  The cat is running software version 12.2(33)SXI7.  Logs are as follows-     s217124-das1.lo4#sh logging Jan 11 2...

Hi, Got the following issue.   Hi there, I am seeing abnormal VPN behaviour on my  ASR1001 running: asr1001_universalk9.03.13.10.S.154_3.S10_ext.bin, where IKEv2 SAs do not expire and get stuck in active state (delete state if manually cleared) surpa...

Hi, I have a 2811 router that is configured as a DHCP server. There are 2 pools defined a IPT and user one. The user scope apprarently has never worked so all workstations are statically assigned. However, the DHCPD receive process is as follows:CPU ...