Hi,
Can anyone give standard procedure to upgrade 6500E VSS Switch IOS and Rommon without having downtime for both single and Dual Supervisors.
Thanks,
Hello Team,
I am facing issue while configuring bfd under fabricpath interfaces, fabricpath is configured and I can see all the adjacencies on all the devices. Below is the network diagram.
When I configure BFD between AGG-A and EoR-A switch...
NX-OS 6.2(8a) is also affected version. following is the fix :https://supportforums.cisco.com/document/12369756/cisco-nexus-7710-version-628a-fcoe-licenses-missing-warning
Hi Guys, Problem/Issue :I have seen following warning message in Nexus 7710 chassis running version 6.2.8a, while i did not have any FCoE license file on chassis.Switch-01# sh license usageFeature Ins Lic Status Expiry Date Co...
Hi, I need configure reporting on Cisco LMS 4.2.5. i search lot in LMS GUI and i could found the setting, even i check the user guide but i didn't found any steps to configure these setting. 1 - I need LMS to sends mails every month to admin team reg...
Hi cgarringer,
I am facing exact same issue, did you get any working solution for this ?
I guess this could be issue from windows server side as well but not sure.
Hi,
I don's see any option in "Platform" field for C3850 to compare between cat3k_caa-universalk9.SPA.03.06.05.E.152-2.E5.bin and cat3k_caa-universalk9.16.02.02.SPA.bin I have C3850-24P switch.
please help.
I think you are missing some commands. please check this link, it might help you.
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/itd/configuration/guide/b-Cisco-Nexus-7000-Series-Intelligent-Traffic-Director-Configuration-Guide/b-...
