About vasanthmanoharan

vasanthmanoharan · 08-08-2016

ASA 9.2 local VPN 1.1.1.1remote network :-10.10.10.10 need to do U-Turn NAT for this public ipclient cisco any connectRadius server :-radius01.xxx.comVPN address pool:- 20.20.20.0/23there is no split tunnel we need to allow full tunnel . challeng...

vasanthmanoharan · 07-07-2016

Hi Any one help to upload the image from when firewall falls into ROMMON mode...

vasanthmanoharan · 06-16-2016

Hi I have scenario here customers local pool ip is 192.168.1.0/24 I want to route this pointed to outside interface . but the problem is 192.168.1.0/24 is already pointed to management interface. can you please guide me hoew to proceed further .

vasanthmanoharan · 12-10-2015

Hi i have C3900 series router . currently we have configured router on stick on it hence the switch is not supporting for routing . currently we have only one interface connected with switch , we need to connect redundant interface . so we plan to co...

vasanthmanoharan · 09-22-2015

1. 2015-09-22 16:27:28 Local4.Alert uswal-nif02 Sep 22 2015 15:30:28: %ASA-1-105005: (Secondary) Lost Failover communications with mate on interface dmz2 2015-09-22 16:27:28 Local4.Alert uswal-nif02 Sep 22 2015 15:30:28: %ASA-1-105008: (Second...

vasanthmanoharan · 08-09-2016

Hi well, i want to do U-turn nat with public ip range 10.1.0.1(just for example)

vasanthmanoharan · 06-27-2016

Hi Yep you are correct but my scenario routing also involved so it takes time to approve the cr so I recommend customer to change the subnet to 192.168.2.0/24

vasanthmanoharan · 12-10-2015

I plan to do :- int port-channel 1 and create desired sub interface on port channel . and map it with physical interface gi0/1 and gi0/2 ... is it work ?

vasanthmanoharan · 06-16-2015

Hi Ganesh i have same problem are you able to find the RCA... if so please share.

vasanthmanoharan · 05-27-2015

yes i did that but again it directs to me same command ... i think we need to change the console to standby ?

Member Since	‎05-21-2014 12:48 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	45
Total Helpful Votes Received	3

User Statistics

User Activity

Need configuration assistance for client to site vpn

ASA ROMMON mode FTP image UPLOAD

in ASA i want to add same segment pointed to different interface.

Router on Stick port channel config C3900 router

cisco ASA syslog alerts

Hi well, i want to do U-turn

Hi Yep you are correct but my

I plan to do :-

Hi Ganesh i have same problem

yes i did that but again it