Hola amigo, Podrías compartir qué modelo de SFP estás utilizando, tal vez haya un problema de compatibilidad, otra cosa, sería muy bueno revisar el estatus de los módulos de SFP con el comando "show interfaces tranceiver", el cual ter permite revisar...
Hola amigo,Es correcto, cuando utilizas "set ip default next-hop", el equipo primero revisa que el destino del paquete exista en la tabla de ruteo y se tienen 2 opciones:Si la dirección de destino existe, el paquete no se enruta por política, sino qu...
Hello robvelc2014,I hope the replacement solves the issue, because I not really sure that this is a hardware problem. I found some bugs related to this and an IOS upgrade was necessary, but the symptoms are not the same at all.Well, good luck!!!
Hello chatrathabhishek,HULC is a process responsible for link status detection. This task is performed after POST is done. The LED process wakes up every 40ms to maintain the LED states. Inside this infinite loop, it will perform the following tasks:...
Hello robvelc2014,Could you please share the "show log" output and also review if a crashinfo is generated, you can check how to retrieve this in the following link:http://www.cisco.com/c/en/us/support/docs/routers/asr-1000-series-aggregation-service...